Floor display FD4-CAN, flush mounted with speaker (red display)
The CAN floor display with voice messages in a compact size
The FD4 CAN is a CAN open-compatible floor display and voice announcer that displays floor designations, directional arrows, text messages and plays voice messages. This version of the floor display is intended for flush mounting and comes with an integrated speaker. A safe and long-term mounting option which protects the unit from vandalism, but also combines all parts in an all-in-one solution.
This floor display has a very compact size and suits most needs. The unit’s integrated 2 MB memory can store up to 240 seconds of voice messages, which means a great deal of freedom for the users to tailor the unit’s messages. If more than one FD4 is used in the same system, only one main unit has to be programmed for the rest of the units in the same floor display-system to show the same information, this because the units share the same bus system. This simplifies programming and configuration of the unit, something that is done easily with the CANwizard software.
If needed, it is also possible with the FD4 to create a floor display-system that is completely stand-alone from the controller by connecting a pulse encoder to the FD4. The pulse encoder is then mounted on the roof of the lift car and a cord is installed from the top of the lift shaft down to the lift pit, enabling the FD4 to read the signals about the position of the lift car in the shaft.
Current consumption: 50 mA
Inputs: 20-30 VDC positive voltage.
Power supply: 24 V
Size (HxWxD):: 87 x 146 x 29 mm
Weight: 325 g
Stand-alone floor display-system possible
2 MB internal memory
Vandal-proof and stylish mounting option